This browser does not support the video element.
1- Products usage
This modern high pressure casting equipment integrating water, electricity, compressor air, hydraulic and vacuum echnologies. It used to cast sanitary ceramic cabinet basins (above and under counter basins), wash basin, lava, squatting pan and lid, sinks etc. High output, low labor cost, energy saving and environmental protection are the main advantages of this equipment. This model conforms to the trend of youth labor shortage and is very popular in the current market.
2- Products structure
8 moulds High Pressure Casting Machine for sanitary ware includes:
1) Main machine
Left end support frame, right end support frame, upper beam and hoisting mold slide.
2) Compressor air system
The machine is composed of end air source processor (droplet separator and micro mist separator), main pipe, single branch pipe, air control valve, air pressure regulating valve, air distribution valve and air control box. The pneumatic control cabinet is mainly used to control the opening, operation and conversion of the main and auxiliary mould, such as vacuum, de-forming, dewatering, pressing and drawing, blowing, flushing, and controlling the slip general valve, large and small flow valves, cooling valves, etc.
3) Hydraulic control system
The machine consist of hydraulic station, mould pressure cylinder and hydraulic pipe, use editing control, it mainly include close and press of main mold and side mold.
The system set low pressure pump and high pressure pump
4) Hydraulic pressurize casting system
The machine consists of feeding slip general valve, slip filter, indicating instrument, slip booster, booster oil cylinder, booster hydraulic station,large and small flow control valve, casting main pipeline, automatic casting 3-way valve, high-pressure casting hose and casting connection pipe.
5) Vacuum demolding system
It icontains vacuum pump, vacuum pump cooling valve, cooling water supply pipeline, water supply control valve, vacuum main pipeline, and vacuum branch pipelines of each station. It is used in the vacuum de-water and de-molding of the green body.
6) Electric control system
Electric control system divide two model of manual and auto, it includes:
Siemens PLC
Feedback system
Human-machine exchange interface to visual operate machine.
Electric control cabinet
Safety control system includes safety curtain and E-stop button.
7) Resin working mold